DC-DC power modules
6W Isolated DC-DC
Module
A compact, isolated
24V supply.
A miniature transformer-isolated DC-DC module with a nominal 28V input and a regulated 24V output. Its 6W rating supports compact auxiliary-power requirements.
Explore specifications ↓
Built around your requirements
Power that fits
your application.
Start with the electrical and mechanical constraints of your application. Discuss your input supply, output load, isolation needs and thermal environment with MTT Innovations to evaluate fit and customization options.
Wide input range
Operate from a 16–40VDC input range with a nominal 28V supply and a single 24V output.
Compact isolated power
Transformer isolation and a 21.8 × 9.5 × 11.2mm package support space-constrained auxiliary-power layouts.
Protection & recovery
Input overvoltage and undervoltage protection, output overcurrent protection and automatic short-circuit recovery support system integration.
Electrical specifications
A closer look at performance.
Review the electrical characteristics and integration requirements for your application.
| Parameter | Specification |
|---|---|
| Input voltage | 16–40 VDC; nominal 28 VDC |
| Maximum input current | ≤0.45 A at full load |
| Output | 24 VDC · 0.25 A · 6 W |
| Efficiency | ≥85% at 28 VDC input, full load |
| Startup delay | ≤500 ms |
| Load regulation | ≤±0.5% |
| Ripple and noise | ≤100 mV at 20 MHz bandwidth |
| Output hold-up time | 15 ms |
| Input overvoltage protection | 41–44 VDC |
| Input undervoltage protection | 14–15.5 VDC |
| Output overcurrent protection | ≥0.3 A |
| Short-circuit behavior | Automatic recovery after the short circuit is cleared |
| Operating temperature | −55 to +85 °C |
| Storage temperature | −55 to +125 °C |
| Isolation | Transformer isolation between input and output |
| Withstand test | 500 VDC, 10 mA, 60 s; input–output/chassis and output–chassis |
| Insulation resistance | >100 MΩ at 500 VDC |
| Cooling | Conduction cooling or external forced-air cooling |
| Weight | ≤10 g |
| Connections | 1: Vin− · 2: Vin+ · 3: REM · 4: Vout+ · 5: GND / output− · 6: NC |
Confirm the final drawing, pin orientation, thermal conditions and electrical limits before integration. The 500VDC figure describes a withstand test, not a continuous operating-voltage rating. Line-regulation performance requires confirmation.
Design & customization enquiries
Tell us what your
system needs.
Share your technical brief with MTT Innovations. We will help you explore product options and assess whether your requested configuration can be supported.
- 01Input-voltage range, transients and source characteristics
- 02Required output voltage, continuous current and load steps
- 03Available space, mounting method and cooling conditions
- 04Isolation, control interfaces and qualification requirements
Let’s build the link
Discuss your
power requirements.
Send your application details and target specifications to start a conversation about 6w isolated dc-dc modules.