Image 1 of 6
Image 2 of 6
Image 3 of 6
Image 4 of 6
Image 5 of 6
Image 6 of 6
| Electrical Specifications | R1 / R2 | Y1 / Y3 | Y2 / Y4 | |
|---|---|---|---|---|
| Frequency Range | MHz | 694-960 | 1710-2690 | 1710-2690 |
| MHz | 694-806, 790-894, 880-960 | 1710-1880, 1850-1990, 1920-2170, 2300-2400, 2490-2690 | 1710-1880, 1850-1990, 1920-2170, 2300-2400, 2490-2690 | |
| Polarization | --- | ±45° | ±45° | ±45° |
| Gain | at Mid Tilt (dBi) | 14.7, 15.0, 15.3 | 15.5, 15.8, 16.1, 16.4, 16.4 | 15.2, 15.5, 15.8, 16.1, 16.1 |
| Over All Tilts (dBi) | 14.5 ± 0.5, 14.8 ± 0.5, 15.1 ± 0.5 | 15.3 ± 0.5, 15.6 ± 0.5, 15.9 ± 0.5, 16.2 ± 0.5, 16.2 ± 0.5 | 15.0 ± 0.5, 15.3 ± 0.5, 15.6 ± 0.5, 15.9 ± 0.5, 15.9 ± 0.5 | |
| Horizontal Beamwidth | degree | 71 ± 4.4, 69 ± 4.4, 67 ± 3.6 | 69 ± 6.5, 67 ± 6.5, 65 ± 6.5, 62 ± 6.2, 62 ± 6.2 | 69 ± 6.5, 67 ± 6.5, 65 ± 6.5, 62 ± 6.2, 62 ± 6.2 |
| Vertical Beamwidth | degree | 11.6 ± 1.1, 10.3 ± 0.9, 9.3 ± 0.8 | 9.5 ± 0.6, 8.8 ± 0.6, 8.2 ± 0.6, 7.2 ± 0.5, 6.5 ± 0.4 | 9.5 ± 0.6, 8.8 ± 0.6, 8.2 ± 0.6, 7.2 ± 0.5, 6.5 ± 0.4 |
| Electrical Downtilt, Continuously Adjustable |
degree | 2-12 | 2-12 | 2-12 |
| Tilt Accuracy | degree | < 1 | ||
| Upper Side Lobe Suppression | First Upper Lobe (dB) | > 15, > 16, > 16 | > 15, > 15, > 16, > 16, > 16 | > 15, > 15, > 16, > 16, > 16 |
| Peak to 20° (dB) | > 14, > 15, > 15 | > 14, > 14, > 15, > 15, > 15 | > 14, > 14, > 15, > 15, > 15 | |
| Front-To-Back Ratio ±30° | dB | > 21, > 22, > 23 | ≥ 23, ≥ 23, > 24, ≥ 25, ≥ 24 | ≥ 23, ≥ 23, > 24, ≥ 25, ≥ 24 |
| Cross Polar Discrimination | At Boresight (dB) | > 16, > 17, > 18 | > 16, > 16, > 17, > 17, > 17 | > 16, > 16, > 17, > 17, > 17 |
| Over Sector (dB) | > 7.0, > 8.0, > 7.5 | > 4.0, > 6.0, > 6.0, > 5.0, > 3.0 | > 4.0, > 6.0, > 6.0, > 5.0, > 3.0 | |
| Isolation | Cross-Polar (dB) | > 26 | > 26 | > 26 |
| Port to Port (dB) | > 26 (R1//R2); > 28 (R1//Y1, Y2, Y3, Y4, Y5, P1) | > 28 | > 28 | |
| Impedance | Ohm | 50 | 50 | 50 |
| VSWR | --- | < 1.5 | < 1.5 | < 1.5 |
| Return Loss | dB | > 14 | > 14 | > 14 |
| PIM3 (2x43 dBm Carrier) | dBc | < -150 | < -150 | < -150 |
| Lightning Protection | --- | DC Ground | DC Ground | DC Ground |
| Maximum Average Input Power per Port, at 50° C Ambient Temperature |
Watts | 250 | 200 | 200 |
| Frequency Range | Y5 | |||||
|---|---|---|---|---|---|---|
| MHz | 2300-2400 | 2490-2690 | ||||
| Polarization | MHz | MHz | ||||
| Electrical Downtilt, Continuously Adjustable | degree | 2-12 | ||||
| Single Beam | Gain | dBi | 14 ± 1 | |||
| Horizontal Beamwidth | degree | 80 ± 10 | 75 ± 10 | |||
| Vertical Beamwidth (3 dB) | degree | 8.2 ± 0.5 | 7.4 ± 0.5 | |||
| Cross-Polar Discrimination (0˚) | dB | ≥ 16 | ≥ 16 | |||
| First Upper Side Lobe Suppression | dB | ≥ 15 | ≥ 15 | |||
| Front-To-Back Ratio Co-Pol, ±30˚ | dB | ≥ 28 | ≥ 28 | |||
| Gain | dBi | 15.5 ± 1 | 16 ± 1 | |||
| Horizontal Beamwidth | degree | 65 | 65 | |||
| Vertical Beamwidth (3 dB) | degree | 8.2 ± 0.5 | 7.4 ± 0.5 | |||
| Cross-Polar Discrimination (0˚) | dB | ≥ 16 | ≥ 16 | |||
| Service Beam | Front-To-Back Ratio | dB | ≥ 28 | ≥ 28 | ||
| (0˚) Direct Beam Gain | dBi | 20 ± 1 | 20 ± 1 | |||
| (0˚) Direction Beam 3dB Horizontal Beamwidth | degree | 22 ± 3 | 21 ± 3 | |||
| ±30˚ Direction Beam Gain | dBi | 18 ± 1 | 18 ± 1 | |||
| (0˚) Direction Beam Cross-Polar Ratio | dB | ≥ 20 | ≥ 20 | |||
| (0˚) Direction Beam Horizontal Side Lobe Suppression | dB | ≥ 12 | ≥ 12 | |||
| (0˚) Direction Beam Front-To-Back Ratio | dB | ≥ 30 | ≥ 30 | |||
| Coupling Factor between Calibration and Each Antenna Port | dB | -26 ± 2 | ||||
| Calibration and Electrical Properties | Maximum Amplitude Tolerance From Calibration Port To Input Ports | dB | ≤ 0.9 | |||
| Maximum Phase Tolerance From Calibration Port To Input Ports | degree | ≤ 10 | ||||
| Ports VSWR | ... | < 1.5 | ||||
| Return Loss | dB | > 14 | ||||
| Average Input Power Per RF Port | Watts | 150 | ||||
| Co-Polar Isolation Between Ports | dB | ≥ 25 | ||||
| Cross-Polar Isolation Between Ports | dB | ≥ 25 | ||||
| Impedance | Ohm | 50 | ||||
| Lightning Protection | ... | DC Ground | ||||
| P1 | ||
|---|---|---|
| 3300-3600 | 3600-3800 | |
| MHz | ... | ... |
| Degree | 2-12 | |
| Gain | 15.5 ± 1 | 15.7 ± 1 |
| Horizontal Beamwidth | 75 ± 10 | 65 ± 10 |
| Vertical Beamwidth (3 dB) | 5.8 ± 0.6 | 5.5 ± 0.6 |
| Cross-Polar Discrimination (0°) | ≥ 15 | ≥ 15 |
| First Upper Side Lobe Suppression | ≥ 15 | ≥ 15 |
| Front-To-Back Ratio Co-Pol, ±30 | ≥ 25 | ≥ 25 |
| Gain | 17.0 ± 0.6 | 17.2 ± 0.6 |
| Horizontal Beamwidth | 65 | 65 |
| Vertical Beamwidth (3 dB) | 5.8 ± 0.6 | 5.5 ± 0.6 |
| Cross-Polar Discrimination (0°) | ≥ 15 | ≥ 15 |
| First Upper Side Lobe Suppression | ≥ 15 | ≥ 15 |
| Front-To-Back Ratio | ≥ 27 | ≥ 27 |
| (0°) Direction Beam Gain | 21.1 ± 0.5 | 21.2 ± 0.5 |
| Horizontal Beamwidth | <25 | <25 |
| +30° Direction Beam Gain | 18 | 18.2 |
| +30° Direction Beam 3dB Horizontal Beamwidth | <30 | <30 |
| (0°) Direction Beam Cross-Polar Ratio | ≥ 18 | ≥ 18 |
| (±) Direction Beam Front-To-Back Ratio | ≥ 30 | ≥ 30 |
| Coupling Factor Between Calibration And Each | -26 ± 2 | |
| Maximum Amplitude Tolerance From Calibration Port To Input Ports | ≤ 0.7 | |
| Maximum Phase Tolerance From Calibration Port To Input Ports | ≤ 9 | |
| Ports VSWR | <1.5 | |
| Return Loss | ≥ 14 | |
| Average Power Capacity | ... | ... |
| Co-Polar Isolation Between Ports | ≥ 20 | |
| Cross-Polar Isolation Between Ports | ≥ 25 | |
| Impedance | 50 | |
| Lightning Protection | DC Ground | |
Hello, World!
