2.jpg
4.jpg
3.jpg
1.jpg
5.jpg
6.jpg
2.jpg
4.jpg
3.jpg
1.jpg
5.jpg
6.jpg

16-Port, Split-Beam Panel Sector Antenna ( 1710 -2400 MHz )

₹0.00

16-Port Split‑Beam Panel Sector Antenna (1710–2400 MHz)

Overview A high-performance, multiport sector antenna engineered for dense urban and suburban deployments. The 16-port split‑beam design delivers flexible beamforming and sectorization across the 1710–2400 MHz band, supporting 2G/3G/4G and many public safety and private LTE use cases. Built for carriers, neutral hosts, and enterprise networks that require high capacity, low interference, and simple integration.

16-Port Split‑Beam Panel Sector Antenna (1710–2400 MHz)

Overview A high-performance, multiport sector antenna engineered for dense urban and suburban deployments. The 16-port split‑beam design delivers flexible beamforming and sectorization across the 1710–2400 MHz band, supporting 2G/3G/4G and many public safety and private LTE use cases. Built for carriers, neutral hosts, and enterprise networks that require high capacity, low interference, and simple integration.

Electrical Specifications for B1/B2 and B3/B4 including gain, beamwidth, isolation and power handling
Electrical Specifications
Parameter Unit B1 / B2 B3 / B4
Frequency Range MHz 1710–1880 1710–1880
Polarization — ±45° ±45°
Gain – at Mid Tilt dBi 17.3 17.0
Gain – Over All Tilts dBi 17.2 ± 0.6 16.9 ± 0.6
Horizontal Beamwidth degree 35 ± 3 35 ± 3
Azimuth Beam Centers degree B1: +30 B2: -30 B3: +30 B4: -30
Vertical Beamwidth degree 10.5 ± 1.1 10.5 ± 1.1
Electrical Downtilt (Continuously Adjustable) degree 2–12 2–12
First Upper Side Lobe Suppression dB > 15 > 15
Front-to-Back Ratio Co-Pol, ±30° dB > 23 > 24
Cross Polar Discrimination at Boresight dB > 15 > 15
Isolation – Intraband dB ≥ 25 ≥ 25
Isolation – Beam-to-Beam (Same Beam) dB ≥ 15 ≥ 15
Isolation – Interband dB ≥ 25 ≥ 25
Impedance Ohm 50 50
VSWR — < 1.5 < 1.5
Return Loss dB > 14 > 14
PIM3 (2×43 dBm Carrier) dBc < -150 < -150
Lightning Protection — DC Ground DC Ground
Maximum Average Input Power per Port (at 50°C) Watts 200 200
Electrical Specifications
Parameter Unit Y1 / Y2 Y3 / Y4
Frequency Range MHz 2300–2400 2300–2400
Polarization — ±45° ±45°
Gain – at Mid Tilt dBi 18.5 18.0
Gain – Over All Tilts dBi 18.4 ± 0.6 17.9 ± 0.6
Horizontal Beamwidth degree 27 ± 3 27 ± 3
Azimuth Beam Centers degree Y1: +30 Y2: -30 Y3: +30 Y4: -30
Vertical Beamwidth degree 8.0 ± 0.8 8.0 ± 0.8
Electrical Downtilt (Continuously Adjustable) degree 2–12 2–12
First Upper Side Lobe Suppression dB > 15 > 15
Front-to-Back Ratio Co-Pol, ±30° dB > 25 > 25
Cross Polar Discrimination at Boresight dB > 15 > 15
Isolation – Intraband dB ≥ 25 ≥ 25
Isolation – Beam-to-Beam (Same Beam) dB ≥ 15 ≥ 15
Isolation – Interband dB ≥ 25 ≥ 25
Impedance Ohm 50 50
VSWR — < 1.5 < 1.5
Return Loss dB > 14 > 14
PIM3 (2×43 dBm Carrier) dBc < -150 < -150
Lightning Protection — DC Ground DC Ground
Maximum Average Input Power per Port (at 50°C) Watts 200 200
Mechanical Specifications
Parameter Unit Specification
Connector Type — (16x) 4.3/10 Female
Connector Position — Bottom
Electrical Tilt Control — Integrated RET
Radome Material — Fiberglass
Antenna Dimensions (H × W × D) mm (in) 2097 × 397 × 157 (82.6 × 15.6 × 6.2)
Antenna Weight – Antenna Only kg (lbs) 31 (68.3)
Antenna Weight – With Clamps kg (lbs) 35 (77.2)
Maximum Wind Speed km/h (mph) 200 (124.3)
Wind Load at 150 km/h – Frontal N (lbf) 770 (173.1)
Wind Load at 150 km/h – Rear N (lbf) 860 (193.3)
Wind Load at 150 km/h – Lateral N (lbf) 375 (84.3)
Operating Temperature °C (°F) -40 to +60 (-40 to +140)