14-Port, Panel Sector Antenna ( 694 - 2690 MHz )

₹0.00

14-Port Panel Sector Antenna (694–2690 MHz)

A high-performance 14-port panel sector antenna engineered for multi-operator deployments and MIMO evolution across low- and mid-band LTE/5G frequencies. Optimized for wideband coverage from 694 to 2690 MHz, this antenna supports enhanced spectral efficiency, flexible beam patterns, and compact mounting for urban and suburban macro sites.

Key Features :

  • Frequency range: 694–2690 MHz — covers LTE bands and key mid-band frequencies used for 2G/3G/4G and sub-3 GHz 5G.

  • 14 ports: Multiple independent ports enable multi-carrier, multi-operator, and Massive MIMO-like configurations within a single enclosure.

  • Port configuration options: Mixed polarization and downtilt per port to support dynamic sectorization and operator isolation.

  • High gain across band: Designed for consistent gain profile and pattern stability across the full band to improve link budget and capacity.

  • Pattern control: Sector beamwidth and sidelobe suppression tuned for minimal inter-sector interference and optimized sector overlap.

  • Low VSWR and high port isolation: Ensures efficient power transfer with minimal inter-port coupling for clean MIMO performance.

  • Robust mechanical design: Weatherproof radome, corrosion-resistant mounting brackets, and reinforced housing for long-term outdoor deployment.

  • Lightweight, compact form factor: Streamlined panel for easy installation on towers, poles, and rooftops with reduced wind load.

  • DC grounding and lightning protection: Integrated grounding provisions and surge protection options for site reliability.

  • Wide temperature range: Engineered for reliable operation in extreme environmental conditions.

14-Port Panel Sector Antenna (694–2690 MHz)

A high-performance 14-port panel sector antenna engineered for multi-operator deployments and MIMO evolution across low- and mid-band LTE/5G frequencies. Optimized for wideband coverage from 694 to 2690 MHz, this antenna supports enhanced spectral efficiency, flexible beam patterns, and compact mounting for urban and suburban macro sites.

Key Features :

  • Frequency range: 694–2690 MHz — covers LTE bands and key mid-band frequencies used for 2G/3G/4G and sub-3 GHz 5G.

  • 14 ports: Multiple independent ports enable multi-carrier, multi-operator, and Massive MIMO-like configurations within a single enclosure.

  • Port configuration options: Mixed polarization and downtilt per port to support dynamic sectorization and operator isolation.

  • High gain across band: Designed for consistent gain profile and pattern stability across the full band to improve link budget and capacity.

  • Pattern control: Sector beamwidth and sidelobe suppression tuned for minimal inter-sector interference and optimized sector overlap.

  • Low VSWR and high port isolation: Ensures efficient power transfer with minimal inter-port coupling for clean MIMO performance.

  • Robust mechanical design: Weatherproof radome, corrosion-resistant mounting brackets, and reinforced housing for long-term outdoor deployment.

  • Lightweight, compact form factor: Streamlined panel for easy installation on towers, poles, and rooftops with reduced wind load.

  • DC grounding and lightning protection: Integrated grounding provisions and surge protection options for site reliability.

  • Wide temperature range: Engineered for reliable operation in extreme environmental conditions.

Electrical Specifications – R1 / R2
Electrical specifications for R1 and R2 ports including frequency bands, gain, beamwidth, tilt, isolation, impedance, and power ratings.
Parameter Unit 694–824 MHz 806–896 MHz 880–960 MHz
Frequency Range MHz 694–960
Polarization ±45°
Gain – Mid Tilt dBi 14.8 15.1 15.4
Gain – Over All Tilts dBi 14.6 ± 0.5 14.9 ± 0.5 15.2 ± 0.4
Horizontal Beamwidth degree 68 ± 4.5 65 ± 4.5 62 ± 4.5
Vertical Beamwidth degree 11.6 ± 1.1 10.4 ± 0.9 9.2 ± 0.8
Electrical Downtilt (Continuous) degree 2–12
Tilt Accuracy degree < 1 < 1 < 1
Upper Side Lobe – First dB > 16 > 16 > 16
Upper Side Lobe – Peak to 20° dB > 15 > 15 > 15
Front-to-Back Ratio (±30°) dB > 22 > 24 > 24
Cross Polar Discrimination – Boresight dB > 18 > 18 > 18
Cross Polar Discrimination – Sector dB > 9.0 > 7.0 > 5.5
Isolation – Cross Polar dB > 26
Isolation – Port to Port dB > 28 (R1,R2 // Y1,Y2,Y3,Y4,Y5)
> 26 (R1 // R2)
Impedance Ohm 50
VSWR < 1.5
Return Loss dB > 14
PIM3 (2 × 43 dBm Carrier) dBc < -150
Lightning Protection DC Ground
Max Avg Input Power per Port (50°C) Watts 250
Electrical Specifications – Y1 / Y3 / Y4 & Y2 / Y5
Electrical specifications for Y1, Y3, Y4 and Y2, Y5 ports including frequency bands, gain, beamwidth, tilt, isolation, impedance, and power ratings.
Parameter Unit Y1 / Y3 / Y4 (1695–2690 MHz) Y2 / Y5 (1695–2690 MHz)
1695–1880 1850–1990 1920–2170 2300–2400 2490–2690 1695–1880 1850–1990 1920–2170 2300–2400 2490–2690
Frequency Range MHz 1695–2690 1695–2690
Polarization ±45° ±45°
Gain – Mid Tilt dBi 15.515.816.116.416.4 15.215.515.816.116.1
Gain – Over All Tilts dBi 15.3 ± 0.615.6 ± 0.515.9 ± 0.516.2 ± 0.516.2 ± 0.5 15.0 ± 0.615.3 ± 0.515.5 ± 0.515.9 ± 0.515.9 ± 0.5
Horizontal Beamwidth degree 69 ± 6.567 ± 6.565 ± 6.563 ± 5.562 ± 6.0 69 ± 6.567 ± 6.565 ± 6.563 ± 5.562 ± 6.0
Vertical Beamwidth degree 9.5 ± 0.68.8 ± 0.68.2 ± 0.67.2 ± 0.56.5 ± 0.4 9.5 ± 0.68.8 ± 0.68.2 ± 0.67.2 ± 0.56.5 ± 0.4
Electrical Downtilt (Continuous) degree 2–12 2–12
Tilt Accuracy degree < 1< 1< 1< 1< 1 < 1< 1< 1< 1< 1
Upper Side Lobe – First dB > 16> 16> 16> 16> 16 > 16> 16> 16> 16> 16
Upper Side Lobe – Peak to 20° dB > 15> 15> 15> 15> 15 > 15> 15> 15> 15> 15
Front-to-Back Ratio (±30°) dB > 24> 24> 25> 25> 25 > 24> 24> 25> 25> 25
Cross Polar Discrimination – Boresight dB > 16> 16> 16> 16> 16 > 16> 16> 16> 16> 16
Cross Polar Discrimination – Sector dB > 8.0> 8.0> 8.0> 6.0> 4.0 > 8.0> 8.0> 8.0> 6.0> 4.0
Isolation – Cross Polar dB > 26 > 26
Isolation – Port to Port dB > 28 > 28
Impedance Ohm 50 50
VSWR < 1.5 < 1.5
Return Loss dB > 14 > 14
PIM3 (2 × 43 dBm Carrier) dBc < -150 < -150
Lightning Protection DC Ground DC Ground
Max Avg Input Power per Port (50°C) Watts 200 200
Mechanical Specifications
Mechanical specifications including connector type, dimensions, wind load, environmental rating, and weight information.
Parameter Details Unit
Connector Type (14x) 4.3/10 Female
Connector Position Bottom
Electrical Tilt Control Integrated RET
Radome Material Fiberglass
Antenna Dimensions (H × W × D) 1997 × 497 × 197 (78.6 × 19.6 × 7.8) mm (in)
Antenna Weight – Antenna Only 33.5 (73.9) kg (lbs)
Antenna Weight – With Clamps 38 (83.8) kg (lbs)
Maximum Wind Speed 200 (124.3) km/h (mph)
Wind Load at 150 km/h – Frontal 915 (205.7) N (lbf)
Wind Load at 150 km/h – Rear 1025 (230.4) N (lbf)
Wind Load at 150 km/h – Lateral 450 (101.2) N (lbf)
Operating Temperature -40 to +60 (-40 to +140) °C (°F)