14-Port, Panel Sector Antenna ( 690 - 2690 MHz )

₹0.00

14-Port Panel Sector Antenna (690–2690 MHz)

Overview Designed for modern multi-band cellular networks, this 14-port panel sector antenna delivers broad frequency coverage from 690 MHz to 2690 MHz with targeted beam control and high isolation between ports. Engineered for dense urban and suburban deployments, it supports simultaneous multi-operator and multi-RAT (2G/3G/4G/5G Non-Standalone midband usage) configurations with simplified installation and ruggedized hardware for outdoor environments.

Key features

  • Frequency range: 690–2690 MHz covering low-band and mid-band cellular allocations for wide operator compatibility.

  • 14 RF ports: Enables multiple carrier aggregation, MIMO layers, and separate feed assignments for operators or RATs.

  • Sector beam: Designed for 65° (typical) horizontal beamwidth for sectorized coverage; elevation optimized for cell planning and reduced interference.

  • High port isolation: Minimizes inter-port interference to support concurrent multi-band operation and improve throughput.

  • Gain: Frequency-dependent gain optimized across bands to balance coverage and capacity needs.

  • Low VSWR: Maintains good impedance match across the entire band to maximize power transfer and minimize reflections.

  • Robust construction: Weatherproof radome and corrosion-resistant mounting hardware for long-term outdoor reliability (IP65/IP66 class designs).

  • Mounting: Universal pole-mount bracket with adjustable tilt and azimuth for easy alignment.

  • Connectorization: Industry-standard connectors (e.g., 4.3-10 or N-type options) available; connectors protected by threaded covers for outdoor use.

  • Lightning and surge protection compatibility: Designed to integrate with grounding and surge protection systems.

  • Low wind-load profile: Slim, aerodynamic housing reduces strain on towers and poles.

14-Port Panel Sector Antenna (690–2690 MHz)

Overview Designed for modern multi-band cellular networks, this 14-port panel sector antenna delivers broad frequency coverage from 690 MHz to 2690 MHz with targeted beam control and high isolation between ports. Engineered for dense urban and suburban deployments, it supports simultaneous multi-operator and multi-RAT (2G/3G/4G/5G Non-Standalone midband usage) configurations with simplified installation and ruggedized hardware for outdoor environments.

Key features

  • Frequency range: 690–2690 MHz covering low-band and mid-band cellular allocations for wide operator compatibility.

  • 14 RF ports: Enables multiple carrier aggregation, MIMO layers, and separate feed assignments for operators or RATs.

  • Sector beam: Designed for 65° (typical) horizontal beamwidth for sectorized coverage; elevation optimized for cell planning and reduced interference.

  • High port isolation: Minimizes inter-port interference to support concurrent multi-band operation and improve throughput.

  • Gain: Frequency-dependent gain optimized across bands to balance coverage and capacity needs.

  • Low VSWR: Maintains good impedance match across the entire band to maximize power transfer and minimize reflections.

  • Robust construction: Weatherproof radome and corrosion-resistant mounting hardware for long-term outdoor reliability (IP65/IP66 class designs).

  • Mounting: Universal pole-mount bracket with adjustable tilt and azimuth for easy alignment.

  • Connectorization: Industry-standard connectors (e.g., 4.3-10 or N-type options) available; connectors protected by threaded covers for outdoor use.

  • Lightning and surge protection compatibility: Designed to integrate with grounding and surge protection systems.

  • Low wind-load profile: Slim, aerodynamic housing reduces strain on towers and poles.

Electrical Specifications
Electrical specifications for R1/R2 and Y1/Y4 antenna bands including gain, beamwidth, isolation, and power ratings.
Parameter Unit 690–824 806–896 880–960 1695–1880 1850–1990 1920–2170 2300–2400 2500–2690
Polarization ±45° ±45° ±45° ±45° ±45° ±45° ±45° ±45°
Gain at Mid Tilt dBi 15.8 16.4 16.8 16.6 16.9 17.2 17.4 17.4
Gain Over All Tilts dBi 15.6 ± 0.5 16.2 ± 0.5 16.6 ± 0.5 16.4 ± 0.6 16.7 ± 0.5 17.0 ± 0.6 17.2 ± 0.5 17.2 ± 0.5
Horizontal Beamwidth degree 65 ± 4.4 60 ± 3.6 58 ± 4.6 66 ± 6.5 63 ± 6.5 62 ± 6.5 58 ± 6.5 58 ± 6.5
Vertical Beamwidth degree 8.8 ± 0.9 7.8 ± 0.6 7.2 ± 0.6 7.2 ± 0.6 6.6 ± 0.6 6.0 ± 0.6 5.4 ± 0.6 4.8 ± 0.6
Electrical Downtilt (Continuously Adjustable) degree 2–12 2–12 2–12 2–12 2–12 2–12 2–12 2–12
Tilt Accuracy degree < 1 < 1 < 1 < 1 < 1 < 1 < 1 < 1
First Upper Lobe Suppression dB > 16 > 16 > 16 > 16 > 16 > 16 > 15 > 15
Upper Lobe Peak to 20° dB > 15 > 15 > 15 > 15 > 15 > 15 > 14 > 14
Front-To-Back Ratio ±30° dB > 23 > 24 > 25 ≥ 25 ≥ 25 > 25 ≥ 26 ≥ 26
Cross Polar Discrimination at Boresight dB > 17 > 18 > 17 > 16 > 16 > 17 > 18 > 18
Cross Polar Discrimination Over Sector dB > 7.0 > 7.0 > 8.0 > 7.0 > 7.0 > 8.0 > 5.0 > 3.0
Isolation – Cross-Polar dB > 26 > 26
Isolation – Port-To-Port dB > 28 (R1,R2//Y1–Y5), > 26 (R1//R2) > 28
Impedance Ohm 50 50
VSWR < 1.5 < 1.5
Return Loss dB > 14 > 14
PIM3 (2×43 dBm Carrier) dBc < -150 < -150
Lightning Protection DC Ground DC Ground
Maximum Average Input Power per Port (50°C) Watts 250 200
Electrical Specifications
Electrical specifications for Y3 and Y2/Y5 antenna bands including gain, beamwidth, isolation, and power ratings.
Parameter Unit Y3
1695–1880
Y3
1850–1990
Y3
1920–2170
Y3
2300–2400
Y3
2500–2690
Y2/Y5
1695–1880
Y2/Y5
1850–1990
Y2/Y5
1920–2170
Y2/Y5
2300–2400
Y2/Y5
2500–2690
Polarization ±45° ±45°
Gain at Mid Tilt dBi 16.7 17.0 17.4 17.6 17.6 16.2 16.5 16.8 17.0 17.0
Gain Over All Tilts dBi 16.5 ± 0.6 16.8 ± 0.5 17.2 ± 0.6 17.4 ± 0.5 17.4 ± 0.5 16.0 ± 0.6 16.3 ± 0.5 16.6 ± 0.6 16.8 ± 0.5 16.8 ± 0.5
Horizontal Beamwidth degree 65 ± 6.5 65 ± 6.5 63 ± 6.5 58 ± 6.5 58 ± 6.5 66 ± 6.5 63 ± 6.5 62 ± 6.5 58 ± 6.5 60 ± 6.5
Vertical Beamwidth degree 6.8 ± 0.6 6.4 ± 0.6 6.0 ± 0.6 5.2 ± 0.6 4.8 ± 0.6 7.2 ± 0.6 6.6 ± 0.6 6.0 ± 0.6 5.4 ± 0.6 4.8 ± 0.6
Electrical Downtilt (Continuously Adjustable) degree 2–12 2–12
Tilt Accuracy degree < 1< 1< 1< 1< 1 < 1< 1< 1< 1< 1
First Upper Lobe Suppression dB > 16> 16> 16> 15> 15 > 16> 16> 16> 15> 15
Upper Lobe Peak to 20° dB > 15> 15> 15> 14> 14 > 15> 15> 15> 14> 14
Front-To-Back Ratio ±30° dB ≥ 26≥ 26> 26≥ 27≥ 27 ≥ 25≥ 25> 25≥ 26≥ 26
Cross Polar Discrimination at Boresight dB > 16> 16> 17> 18> 18 > 16> 16> 17> 18> 18
Cross Polar Discrimination Over Sector dB > 7.0> 7.0> 8.0> 6.0> 4.0 > 7.0> 7.0> 8.0> 5.0> 3.0
Isolation – Cross-Polar dB > 26 > 26
Isolation – Port-To-Port dB > 28 > 28
Impedance Ohm 50 50
VSWR < 1.5 < 1.5
Return Loss dB > 14 > 14
PIM3 (2×43 dBm Carrier) dBc < -150 < -150
Lightning Protection DC Ground DC Ground
Maximum Average Input Power per Port (50°C) Watts 200 200
Mechanical Specifications
Mechanical specifications including dimensions, weight, wind load, temperature range, and construction details.
Parameter Details / Unit Value
Connector Type (14×) 4.3/10 Female
Connector Position Bottom
Electrical Tilt Control Integrated RET
Radome Material Fiberglass
Antenna Dimensions (H × W × D) mm (in) 2750 × 497 × 197 (108.3 × 19.6 × 7.8)
Antenna Weight – Antenna Only kg (lbs) 44 (97.0)
Antenna Weight – With Clamps kg (lbs) 51.5 (113.5)
Maximum Wind Speed km/h (mph) 200 (124.3)
Wind Load at 150 km/h – Frontal N (lbf) 1265 (284.4)
Wind Load at 150 km/h – Rear N (lbf) 1410 (317.0)
Wind Load at 150 km/h – Lateral N (lbf) 620 (139.4)
Operating Temperature °C (°F) -40 to +60 (-40 to +140)