2.jpg
4.jpg
3.jpg
1.jpg
5.jpg
6.jpg
2.jpg
4.jpg
3.jpg
1.jpg
5.jpg
6.jpg

13-Port, TDD Hybrid Panel Antenna ( 1710 - 3800 MHz )

₹0.00

13-Port TDD Hybrid Panel Antenna Frequency Range: 1710–3800 MHz

An advanced 13-port time-division duplex (TDD) hybrid panel antenna designed for contemporary multi-band wireless networks. Engineered to deliver high capacity, flexible deployment options, and robust performance across 1710–3800 MHz, this antenna supports dense urban, suburban, and enterprise environments where space, interference management, and spectral efficiency matter.

Key Features :

  • Frequency Coverage: Continuous wideband operation from 1710 MHz to 3800 MHz to support LTE, 5G NR TDD bands, CBRS, and other mid-band services.

  • 13 Ports: Multiple ports enable MIMO configurations, sector splitting, and flexible carrier/beam management for capacity scaling and interference control.

  • Hybrid Design: Combines panel and sectorized elements to provide a balance of gain, beamwidth, and isolation across ports. Supports mixed polarization (vertical/horizontal and slant) options for improved MIMO performance.

  • High Isolation: Optimized port-to-port isolation to minimize inter-port interference and preserve signal integrity in high-order MIMO deployments.

  • Low PIM (Passive Intermodulation): Manufactured and tested to low PIM standards for reliable operation with high transmit powers and multiple carriers.

  • Durable Construction: Rugged radome and corrosion-resistant mounting hardware for long-term outdoor deployment under harsh environmental conditions.

  • Weatherproof: IP65/IP66-class sealing for water and dust protection, and operational temperature range suitable for extreme climates.

  • Lightweight, Compact Form Factor: Engineered for rooftop, tower, pole, and small-cell installations where space and wind load constraints are critical.

  • Easy Installation: Tilt, azimuth, and elevation mounting adjustments plus clear labeling of ports for fast commissioning and maintenance.

  • Cable/Connector Options: Multiple factory-configurable connector types (N-female, 4.3-10, or others) and cable assemblies available to fit site requirements.

  • Grounding & Lightning Protection Provisions: Integrated grounding points and compatibility with standard lightning arrestors to protect equipment.

13-Port TDD Hybrid Panel Antenna Frequency Range: 1710–3800 MHz

An advanced 13-port time-division duplex (TDD) hybrid panel antenna designed for contemporary multi-band wireless networks. Engineered to deliver high capacity, flexible deployment options, and robust performance across 1710–3800 MHz, this antenna supports dense urban, suburban, and enterprise environments where space, interference management, and spectral efficiency matter.

Key Features :

  • Frequency Coverage: Continuous wideband operation from 1710 MHz to 3800 MHz to support LTE, 5G NR TDD bands, CBRS, and other mid-band services.

  • 13 Ports: Multiple ports enable MIMO configurations, sector splitting, and flexible carrier/beam management for capacity scaling and interference control.

  • Hybrid Design: Combines panel and sectorized elements to provide a balance of gain, beamwidth, and isolation across ports. Supports mixed polarization (vertical/horizontal and slant) options for improved MIMO performance.

  • High Isolation: Optimized port-to-port isolation to minimize inter-port interference and preserve signal integrity in high-order MIMO deployments.

  • Low PIM (Passive Intermodulation): Manufactured and tested to low PIM standards for reliable operation with high transmit powers and multiple carriers.

  • Durable Construction: Rugged radome and corrosion-resistant mounting hardware for long-term outdoor deployment under harsh environmental conditions.

  • Weatherproof: IP65/IP66-class sealing for water and dust protection, and operational temperature range suitable for extreme climates.

  • Lightweight, Compact Form Factor: Engineered for rooftop, tower, pole, and small-cell installations where space and wind load constraints are critical.

  • Easy Installation: Tilt, azimuth, and elevation mounting adjustments plus clear labeling of ports for fast commissioning and maintenance.

  • Cable/Connector Options: Multiple factory-configurable connector types (N-female, 4.3-10, or others) and cable assemblies available to fit site requirements.

  • Grounding & Lightning Protection Provisions: Integrated grounding points and compatibility with standard lightning arrestors to protect equipment.
Electrical Specifications
Electrical specifications for Y1 / Y2 antenna configuration
Parameter Sub-Parameter Unit 1710–1880 1850–1990 1920–2170 2300–2400 2490–2690
Frequency Range Y1 / Y2 MHz 1710–2690
Polarization — — ±45°
Gain At Mid Tilt dBi 17.1 17.3 17.6 18.1 18.0
Over All Tilts dBi 17.0 ± 0.5 17.2 ± 0.5 17.5 ± 0.5 18.0 ± 0.5 17.9 ± 0.6
Horizontal Beamwidth — degree 67 ± 5 65 ± 5 63 ± 5 61 ± 5 58 ± 5
Vertical Beamwidth — degree 7.0 ± 0.7 6.7 ± 0.6 6.3 ± 0.6 5.4 ± 0.5 5.0 ± 0.4
Electrical Downtilt, Continuously Adjustable — degree 2–12
First Upper Side Lobe Suppression — dB > 16 > 16 > 16 > 16 > 16
Front-To-Back Ratio, ±30° — dB > 25 > 25 > 25 > 25 > 25
Cross Polar Discrimination At Boresight dB > 20 > 20 > 20 > 20 > 20
Over Sector dB > 10 > 10 > 10 > 9 > 8
Isolation Cross-Polar dB > 28
Port-to-Port dB > 28
Impedance — Ohm 50
VSWR — — < 1.5
Return Loss — dB > 14
PIM3 (2x43 dBm Carrier) — dBc < -150
Lightning Protection — — DC Ground
Maximum Average Input Power per Port, at 50° C Ambient Temperature — Watts 200
Electrical Specifications
13-Port, TDD Hybrid Panel Antenna, 65°/65°/75° HBW, (2x)1710–2690 / (1x) 3300–3800 MHz, 18/18/16 dBi, 2–12°T, 1.397 m
TDD LTE and 5G Electrical Specifications for 3300–3800 MHz hybrid panel antenna
Section Parameter Unit 3300–3600 3600–3800
Single Column Beam Gain dBi 15.2 ± 1 15.7 ± 1
Single Column Beam Horizontal Beamwidth degree 75 ± 15 70 ± 15
Single Column Beam Vertical Beamwidth (3 dB) degree 6.6 ± 0.7 6.0 ± 0.7
Single Column Beam Cross-Polar Discrimination (Boresight) dB ≥ 15 ≥ 15
Single Column Beam Cross-Polar Discrimination (Sector) dB ≥ 8 ≥ 8
Single Column Beam First Upper Side Lobe Suppression dB ≥ 15 ≥ 15
Single Column Beam Front-To-Back Ratio dB ≥ 22 ≥ 23
General Electrical Downtilt (Continuous) degree 2–12
65° Broadcast Beam Gain dBi 16.5 ± 1 17.0 ± 1
Broadcast Beam (SSB Sweep) Max Gain dBi 20.0 20.5
65° Broadcast Beam Horizontal Beamwidth degree 65 65
65° Broadcast Beam Vertical Beamwidth (3 dB) degree 6.6 ± 0.7 6.0 ± 0.7
65° Broadcast Beam Front-To-Back Ratio dB ≥ 25 ≥ 25
Service Beam (0°) Direct Beam Gain dBi 20.5 21
Service Beam (0°) Horizontal 3 dB Beamwidth degree 25 24
Service Beam (0°) Cross-Polar Ratio at Beampeak dB ≥ 18 ≥ 18
Service Beam (0°) Front-To-Back Ratio dB ≥ 28 ≥ 28
Service Beam (±30°) Beam Gain dBi 19.5 19.9
Service Beam (±30°) Horizontal 3 dB Beamwidth degree 28 26
Service Beam (±30°) Front-To-Back Ratio dB ≥ 25 ≥ 25
Soft Split Multi-Beam Gain dBi 19.6 20.0
Soft Split Multi-Beam Horizontal Beamwidth (3 dB) degree 31 29
Soft Split Multi-Beam Front-To-Back Ratio dB ≥ 25 ≥ 25
Soft Split Multi-Beam Cross Polar Ratio at Beampeak dB ≥ 15 ≥ 15
Calibration Coupling Factor (Cal Port to Ant Port) dB -26 ± 2
Calibration Max Amplitude Tolerance dB ≤ 0.9
Calibration Max Phase Tolerance degree ≤ 9
General Ports VSWR — < 1.5
General Return Loss dB > 14
General Average Power Capacity W 25
General Co-Polar Isolation Between Ports dB ≥ 23
General Inter-band Isolation dB ≥ 23
General Impedance Ohms 50
General Lightning Protection — DC Ground
5G Electrical Specifications – P1
5G Electrical Specifications P1 for 3300–3800 MHz band including single column, broadcast and service beam parameters
Section Parameter Unit 3300–3600 3600–3800
Frequency Range Overall MHz 3300–3800
Single Column Beam Gain dBi 15.2 ± 1 15.7 ± 1
Single Column Beam Horizontal Beamwidth degree 75 ± 15 70 ± 15
Single Column Beam Vertical Beamwidth (3 dB) degree 6.6 ± 0.7 6.0 ± 0.7
Single Column Beam Cross-Polar Discrimination (Boresight 0°) dB ≥ 15 ≥ 15
Single Column Beam Cross-Polar Discrimination (Over Sector) dB ≥ 8 ≥ 8
Single Column Beam First Upper Side Lobe Suppression dB ≥ 15 ≥ 15
Single Column Beam Front-To-Back Ratio dB ≥ 22 ≥ 23
Broadcast Beam (±13°, ±43°) Gain dBi 20.0 20.5
Broadcast Beam Horizontal Beamwidth degree 65 65
Broadcast Beam Vertical Beamwidth degree 6.6 ± 0.7 6.0 ± 0.7
Broadcast Beam First Upper Side Lobe Suppression dB ≥ 15 ≥ 15
Broadcast Beam Front-To-Back Ratio dB ≥ 25 ≥ 25
Service Beam (0°) Direct Beam Gain dBi 20.5 21
Service Beam (0°) Horizontal 3 dB Beamwidth degree 25 24
Service Beam (0°) Cross-Polar Ratio at Beampeak dB ≥ 18 ≥ 18
Service Beam (0°) Front-To-Back Ratio dB ≥ 28 ≥ 28
Service Beam (0°) Horizontal Sidelobe dB 12 12
Mechanical Specifications
Mechanical specifications including dimensions, weight, wind load, connectors and environmental ratings
Parameter Sub-Parameter Unit Value
Connector Type — — (4x) 4.3/10 Female + (1x) MQ4 + (1x) MQ5
Connector Position — — Bottom
Electrical Tilt Control — — Integrated RET
Radome Material — — Fiberglass
Antenna Dimensions (H × W × D) — mm (in) 1397 × 397 × 157 (55.0 × 15.6 × 6.2)
Antenna Weight Antenna Only kg (lbs) 22 (48.5)
With Clamps kg (lbs) 26 (57.3)
Maximum Wind Speed — km/h (mph) 200 (124.3)
Wind Load at 150 km/h Frontal N (lbf) 510 (114.7)
Rear N (lbf) 570 (128.1)
Lateral N (lbf) 250 (56.2)
Operating Temperature — °C (°F) -40 to +60 (-40 to +140)