2.jpg
4.jpg
3.jpg
1.jpg
5.jpg
6.jpg
2.jpg
4.jpg
3.jpg
1.jpg
5.jpg
6.jpg

12-Port, 3-Beam Panel Sector Antenna ( 1710 - 2400 MHz )

₹0.00

12-Port, 3-Beam Panel Sector Antenna (1710–2400 MHz)

Overview This high-performance 12-port, 3-beam panel sector antenna covers the 1710–2400 MHz band and is engineered for modern cellular and wireless deployments requiring dense capacity, precise sector shaping, and simplified installation. With three distinct beam panels integrated into a single radome, the antenna reduces tower clutter while providing resilient multi-operator support and flexible polarization options.

Key features

  • Frequency range: 1710–2400 MHz (supports GSM, UMTS, AWS, and many 2.4 GHz applications)

  • Configuration: 3 beams × 4 ports per beam = 12 RF ports

  • Polarization: Cross-polarized ports per beam (±45°) to maximize diversity and MIMO performance

  • Gain: Optimized per sub-band for consistent sector coverage and high effective radiated power

  • Beamwidth: Narrow elevation patterns for minimized clutter and controlled downtilt; configurable electrical and mechanical downtilt compatibility

  • Isolation: High port-to-port isolation to enable multi-operator or multi-carrier co-location without mutual interference

  • VSWR: Low VSWR across the band for efficient power transfer and minimal reflection loss

  • Impedance: 50 ohm nominal

12-Port, 3-Beam Panel Sector Antenna (1710–2400 MHz)

Overview This high-performance 12-port, 3-beam panel sector antenna covers the 1710–2400 MHz band and is engineered for modern cellular and wireless deployments requiring dense capacity, precise sector shaping, and simplified installation. With three distinct beam panels integrated into a single radome, the antenna reduces tower clutter while providing resilient multi-operator support and flexible polarization options.

Key features

  • Frequency range: 1710–2400 MHz (supports GSM, UMTS, AWS, and many 2.4 GHz applications)

  • Configuration: 3 beams × 4 ports per beam = 12 RF ports

  • Polarization: Cross-polarized ports per beam (±45°) to maximize diversity and MIMO performance

  • Gain: Optimized per sub-band for consistent sector coverage and high effective radiated power

  • Beamwidth: Narrow elevation patterns for minimized clutter and controlled downtilt; configurable electrical and mechanical downtilt compatibility

  • Isolation: High port-to-port isolation to enable multi-operator or multi-carrier co-location without mutual interference

  • VSWR: Low VSWR across the band for efficient power transfer and minimal reflection loss

  • Impedance: 50 ohm nominal

Electrical Specifications
Electrical specifications for Y1/Y2, Y3/Y4, and Y5/Y6 antenna ports covering 1710–2400 MHz bands
Parameter Sub-Parameter Unit Y1/Y2 1710–1880 Y1/Y2 1920–2170 Y1/Y2 2300–2400 Y3/Y4 1710–1880 Y3/Y4 1920–2170 Y3/Y4 2300–2400 Y5/Y6 1710–1880 Y5/Y6 1920–2170 Y5/Y6 2300–2400
Frequency Range MHz 1710–2400 1710–2400 1710–2400
MHz 1710–18801920–21702300–2400 1710–18801920–21702300–2400 1710–18801920–21702300–2400
Polarization — ±45° ±45° ±45°
Gain dBi 18.0 ± 0.518.6 ± 0.519.0 ± 0.5 18.5 ± 0.519.0 ± 0.519.5 ± 0.5 18.0 ± 0.518.6 ± 0.519.0 ± 0.5
Horizontal Beamwidth degree 32 ± 228.8 ± 225.5 ± 2 29 ± 226.3 ± 223.5 ± 2 32 ± 228.8 ± 225.5 ± 2
Vertical Beamwidth degree 10.3 ± 0.39.1 ± 0.37.9 ± 0.3 10.3 ± 0.39.1 ± 0.38.0 ± 0.3 10.3 ± 0.39.1 ± 0.37.9 ± 0.3
Electrical Downtilt, Continuously Adjustable degree 0–10 0–10 0–10
First Upper Side Lobe Suppression dB ≥ 18≥ 18≥ 18 ≥ 18≥ 18≥ 18 ≥ 18≥ 18≥ 18
Front-To-Back Ratio Co-Pol, 180° ±30° dB ≥ 25≥ 25≥ 25 ≥ 25≥ 25≥ 25 ≥ 25≥ 25≥ 25
Cross Polar at Boresight dB ≥ 15≥ 15≥ 15 ≥ 15≥ 15≥ 15 ≥ 15≥ 15≥ 15
Discrimination Over Sector (3 dB) dB ≥ 7≥ 7≥ 7 ≥ 7≥ 7≥ 7 ≥ 7≥ 7≥ 7
Isolation Interport dB ≥ 25 ≥ 25 ≥ 25
Beam-To-Beam dB ≥ 20 ≥ 20 ≥ 20
Impedance Ohm 50 50 50
VSWR — ≤ 1.5 ≤ 1.5 ≤ 1.5
Return Loss dB > 14 > 14 > 14
PIM3 (2×43 dBm Carrier) dBc < -150 < -150 < -150
Lightning Protection — DC Ground DC Ground DC Ground
Maximum Average Input Power per Port, at 50°C Ambient Temperature Watts 250 250 250
Mechanical Specifications
Mechanical specifications including connector details, materials, dimensions, weight, and wind load performance
Parameter Condition Unit Specification
Connector Type — (12x) 4.3/10 Female
Connector Position — Bottom
Electrical Tilt Control — Integrated RET
Radome Material — UV Resistant ASA + PC/GF
Antenna Dimensions (H × W × D) mm (in) 2250 × 460 × 150 (88.6 × 18.1 × 5.9)
Antenna Weight, Antenna Only (±5%) kg (lbs) ≤ 40 (≤ 88.2)
Maximum Wind Speed km/h (mph) 200 (124.3)
Wind Load Frontal (at 150 km/h) N (lbf) 1323 (297.4)
Rear (at 150 km/h) N (lbf) 1323 (297.4)
Lateral (at 150 km/h) N (lbf) 432 (97.1)