2.jpg
4.jpg
1.jpg
3.jpg
5.jpg
6.jpg
2.jpg
4.jpg
1.jpg
3.jpg
5.jpg
6.jpg

11-Port, TDD Hybrid Panel Antenna ( 698 - 3700 MHz )

₹0.00

11-Port TDD Hybrid Panel Antenna (698–3700 MHz)

Overview :

  • Compact, high-performance panel antenna engineered for TDD and FDD deployments across a wide frequency range of 698–3700 MHz.

  • Eleven independently fed ports: flexible MIMO, carrier aggregation, and multi-operator support with minimal footprint.

  • Hybrid design combines sectorized and wideband radiating elements to deliver consistent coverage, improved capacity, and enhanced spectral efficiency.

Product Features :

  • Frequency range: 698–3700 MHz (covers low-band, mid-band and sub-3.7 GHz CBRS/LTE/NR bands)

  • Ports: 11 independent RF ports

  • Polarization: Cross-polarized pairs on key ports; hybrid polarization where required for spatial diversity and isolation

  • Gain: Optimized per sub-band to maximize downlink/uplink balance (typical values vary by model; consult datasheet for per-band gain figures)

  • Beamwidth: Sector-optimized horizontal beamwidth (e.g., 65°–120° options depending on configuration); vertical beam shaping to control tilt and coverage

  • VSWR: Typically <2.0:1 across each operational sub-band

  • Port-to-port isolation: High isolation to support multiple simultaneous carriers and MIMO layers

  • Power handling: Designed for modern base station TDD power levels

  • Impedance: 50 Ω

11-Port TDD Hybrid Panel Antenna (698–3700 MHz)

Overview :

  • Compact, high-performance panel antenna engineered for TDD and FDD deployments across a wide frequency range of 698–3700 MHz.

  • Eleven independently fed ports: flexible MIMO, carrier aggregation, and multi-operator support with minimal footprint.

  • Hybrid design combines sectorized and wideband radiating elements to deliver consistent coverage, improved capacity, and enhanced spectral efficiency.

Product Features :

  • Frequency range: 698–3700 MHz (covers low-band, mid-band and sub-3.7 GHz CBRS/LTE/NR bands)

  • Ports: 11 independent RF ports

  • Polarization: Cross-polarized pairs on key ports; hybrid polarization where required for spatial diversity and isolation

  • Gain: Optimized per sub-band to maximize downlink/uplink balance (typical values vary by model; consult datasheet for per-band gain figures)

  • Beamwidth: Sector-optimized horizontal beamwidth (e.g., 65°–120° options depending on configuration); vertical beam shaping to control tilt and coverage

  • VSWR: Typically <2.0:1 across each operational sub-band

  • Port-to-port isolation: High isolation to support multiple simultaneous carriers and MIMO layers

  • Power handling: Designed for modern base station TDD power levels

  • Impedance: 50 Ω

Electrical Specifications
Parameter Sub Parameter Unit 698-806 MHz 790-894 MHz 880-960 MHz
Frequency Range MHz 698-960
Polarization --- ±45°
Gain At Mid Tilt dBi 15.8 16.4 16.8
Over All Tilts dBi 15.7 ± 0.6 16.3 ± 0.6 16.7 ± 0.6
Horizontal Beamwidth degree 69 ± 5 66 ± 5 63 ± 5
Vertical Beamwidth degree 8.8 ± 0.9 7.6 ± 0.8 7.1 ± 0.7
Electrical Downtilt (Continuously Adjustable) degree 0-10
First Upper Side Lobe Suppression dB > 16 > 16 > 16
Front-To-Back Ratio (±30°) dB > 23 > 24 > 24
Isolation
Cross-Polar dB > 25
Interband dB > 25
Impedance Ohm 50
VSWR --- < 1.5
Return Loss dB > 14
Lightning Protection --- DC Ground
Maximum Average Input Power per Port
(at 50°C Ambient Temperature)		 Watts 250
TDD LTE Electrical Specifications P1
Category Parameter Sub-Parameter Unit Value (P1)
General Frequency Range MHz 3300–3700
Polarization — ±45°
Electrical Downtilt, Continuously Adjustable degree 2–12
Single Column Beam Gain dBi 17
Horizontal Beamwidth degree 75
Vertical Beamwidth (3 dB) degree 5.8
Cross-Polar Discrimination At Boresight (0°) dB ≥ 15
Cross-Polar Discrimination Over Sector dB ≥ 8
First Upper Side Lobe Suppression dB ≥ 15
Front-To-Back Ratio dB ≥ 23
65° Broadcast Beam Gain dB 18
Horizontal Beamwidth (3 dB) degree 65
Vertical Beamwidth (3 dB) degree 5.8
Cross-Polar Discrimination 0° dB ≥ 15
First Upper Side Lobe Suppression dB ≥ 15
Front-To-Back Ratio dB ≥ 25
Service Beam 0° Direct Beam Gain dBi 21.5
0° Direct Beam Horizontal 3 dB Beamwidth degree 26
0° Direct Beam Cross-Polar Ratio at Beampeak dB ≥ 16
0° Direct Beam Front-To-Back Ratio dB ≥ 27
0° Direct Beam Horizontal Sidelobe dB 12
±30° Direction Beam Gain dBi 20
±30° Direction Beam Horizontal 3 dB Beamwidth degree 28
±30° Direction Beam Front-To-Back Ratio dB ≥ 24
Soft Split Multi-Beam Gain dBi 20
Horizontal Beamwidth (3 dB) degree 31
Front-To-Back Ratio dB ≥ 25
Calibration & Electrical Parameters Coupling Factor Between Calibration and Each Antenna Port dB -26 ± 2
Maximum Amplitude Tolerance From Calibration Port To Input Ports dB ≤ 1.0
Maximum Phase Tolerance From Calibration Port To Input Ports degree ≤ 9
Ports VSWR — < 1.5
Average Power Capacity W 25
Co-Polar Isolation Between Ports dB ≥ 23
Inter-band Isolation dB ≥ 23
Other Impedance Ohms 50
Lightning Protection — DC Ground
5G Electrical Specifications P1
Category Parameter Sub-Parameter Unit Value (P1)
General Frequency Range MHz 3300–3700
Single Column Beam Gain dBi 17
Horizontal Beamwidth degree 75
Vertical Beamwidth (3 dB) degree 5.8
Cross-Polar Discrimination At Boresight (0°) dB ≥ 15
Cross-Polar Discrimination Over Sector dB ≥ 8
First Upper Side Lobe Suppression dB ≥ 15
Broadcast Beam (±13°, ±43° Service Beam) Gain dB 21.0
Horizontal Beamwidth (10 dB) degree 120
Vertical Beamwidth (3 dB) degree 5.8
First Upper Side Lobe Suppression dB ≥ 15
Front-To-Back Ratio dB ≥ 25
Service Beam 0° Direct Beam Gain dBi 21.5
0° Direct Beam Horizontal 3 dB Beamwidth degree 26
0° Direct Beam Cross-Polar Ratio at Beampeak dB ≥ 16
0° Direct Beam Front-To-Back Ratio dB ≥ 27
0° Direct Beam Horizontal Sidelobe dB 12