10-Port, Panel Antenna ( 698 - 2690 MHz )

₹0.00

Overview :

The 10‑Port Panel Antenna (698–2690 MHz) is a high‑performance, multi‑band solution engineered for demanding cellular and private LTE/5G deployments. Optimized for macro, small cell, DAS, and neutral host applications, the robust panel delivers uniform coverage, high isolation between ports, and superior efficiency across low‑band and mid‑band spectrum.

Product Features :

  • Frequency range: 698–2690 MHz (supports cellular bands including 700/800/850/900/1800/1900/2100/2600 MHz)

  • Ten independent RF ports for multi‑operator or multi‑sector configurations

  • Wideband panel elements designed for consistent antenna pattern and gain across the entire band

  • High port isolation to minimize inter‑carrier interference

  • Low VSWR per port for efficient power transfer and reduced PA strain

  • Durable, weatherproof radome and corrosion‑resistant mounting hardware for outdoor use

  • Compact, low‑profile form factor for aesthetic rooftop and wall installations

  • Mounting options: pole, mast, and wall brackets included for flexible deployment

  • Connector types: ruggedized N‑Female (or specify customer connector option)

  • Lightning and grounding provisions to meet site safety requirements

Overview :

The 10‑Port Panel Antenna (698–2690 MHz) is a high‑performance, multi‑band solution engineered for demanding cellular and private LTE/5G deployments. Optimized for macro, small cell, DAS, and neutral host applications, the robust panel delivers uniform coverage, high isolation between ports, and superior efficiency across low‑band and mid‑band spectrum.

Product Features :

  • Frequency range: 698–2690 MHz (supports cellular bands including 700/800/850/900/1800/1900/2100/2600 MHz)

  • Ten independent RF ports for multi‑operator or multi‑sector configurations

  • Wideband panel elements designed for consistent antenna pattern and gain across the entire band

  • High port isolation to minimize inter‑carrier interference

  • Low VSWR per port for efficient power transfer and reduced PA strain

  • Durable, weatherproof radome and corrosion‑resistant mounting hardware for outdoor use

  • Compact, low‑profile form factor for aesthetic rooftop and wall installations

  • Mounting options: pole, mast, and wall brackets included for flexible deployment

  • Connector types: ruggedized N‑Female (or specify customer connector option)

  • Lightning and grounding provisions to meet site safety requirements

Electrical Specifications

Electrical Specifications Table
Parameter Unit R1 Y1 / Y3 Y2 / Y4
Frequency Range MHz 698–960 1695–2690 1695–2690
Polarization --- ±45° ±45° ±45°
Gain (Mid Tilt) dBi 16.2 17.5 17.7
Gain (All Tilts) dBi 16.0 ± 0.6 17.3 ± 0.5 17.5 ± 0.5
Horizontal Beamwidth degree 69 ± 4.5 66 ± 6.5 64 ± 6.5
Vertical Beamwidth degree 8.8 ± 0.9 6.6 ± 0.5 6.2 ± 0.5
Electrical Downtilt degree 2–12 2–12 2–12
Tilt Accuracy degree < 1 < 1 < 1
Upper Side Lobe Suppression dB > 16 > 18 > 16
Front-To-Back Ratio (±30°) dB > 23 > 25 > 25
Cross Polar Discrimination (Boresight) dB > 17 > 16 > 16
Isolation (Cross-Polar) dB > 28 > 28 > 28
Impedance Ohm 50 50 50
VSWR --- < 1.5 < 1.5 < 1.5
Return Loss dB > 14 > 14 > 14
PIM3 (2x43 dBm) dBc < -153 < -153 < -153
Lightning Protection --- DC Ground DC Ground DC Ground
Max Input Power (50°C) Watts 250 200 200

Mechanical Specifications

Mechanical Specifications Table
Parameter Sub-Parameter Unit Value
Connector Type --- --- (10x) 4.3/10 Female
Connector Position --- --- Bottom
Electrical Tilt Control --- --- Integrated RET
Radome Material --- --- UPVC
Antenna Dimensions (H × W × D) --- mm (in) 2690 × 350 × 197 (105.9 × 13.8 × 7.8)
Antenna Weight Antenna Only kg (lbs) 34 (75.0)
With Clamps kg (lbs) 38 (83.8)
Maximum Wind Speed --- km/h (mph) 200 (124.3)
Wind Load at 150 km/h Frontal N (lbf) 870 (195.6)
Rear N (lbf) 975 (219.2)
Lateral N (lbf) 605 (136.0)
Operating Temperature --- °C (°F) -40 to +60 (-40 to 140)